S620 Mini-ITX SFF PC Case for Full Tower Air Coolers
S620 Mini-ITX SFF PC Case for Full Tower Air Coolers
  • Support for Mini-ITX and Mini-DTX motherboards
  • Compatible with air coolers up to 165mm tall
  • (3x) PCIe expansion card slot cutouts for large GPUs or powerful air cooling configurations
  • Ability to mount 120mm, 140mm, 240mm, and 280mm radiators for water cooling setups
  • Unique "Flipping" feature allows case window side to face you on either side of your desk
  • Optional carry handle, colors, side panel styles, HDD / SSD brackets, and more
  • Manufactured in the USA by Sliger
Add To Cart
FREE SHIPPING (US ONLY)
Order Terms & Conditions
*Assembled to Order

Please note, orders are assembled to order, and may take 3-10 business days to fulfill.

Higher quantity orders are granted priority in our queues, and options to expedite your order are available if needed.

To verify if expediting your order is an option, please contact us directly at 1-775-356-5595 or sales@sliger.com.


Handle Options
The handle kit also enables mounting a slim 120mm fan in the top of the chassis via the The Handle/Fan Mount Bracket.
Additional SSD Mounting Options
* Window SSD Bracket cannot be installed at same time as side fan mount bracket.
4x 2.5" SSD Bracket
The case frame has mounting for 2x 2.5" SSD on either power supply bracket.
These brackets are only recommended for users with more than 2x 2.5" SSD or HDD.
2x 3.5" HDD Bracket
Two of these brackets can be mounted on the removable side bracket,
or one of these brackets can be mounted on the obround pattern of the SFX PSU bracket.
Low Profile 1x 3.5" HDD Bracket
These brackets are for mounting a 3.5" HDD anywhere the case can mount a 120mm fan;
1x on the front, 1x on side of PSU, 2x under GPU, 1x rear, or 2x on removable side bracket.

Handle Kits and Fan Mounting Brackets

Chrome Handle Kit
$35
Black Handle Kit
$35

Hard Drive and SSD Mounting Brackets

Window Mount SSD Kit
$15
2x 3.5" HDD Bracket
$10
4x 2.5" SSD Kit
$10
3.5" HDD Bracket
$10

Chassis USB Options

1x USB 3.0 Type A, 55CM
$10
2x USB 3.0 Cable, 55CM
$10

Misc Chassis Kits and Parts

Hardware Kit
$20
Both PCord Covers
$10
Power Button + Spacer
$10

Case Feet

4x Chrome Feet Set
$30
4x Square SBR Feet
$10

Top Panels

Black Top Panel
$20

Front Panels

Black Front Panel
$20

Vented Side Panels

Vented Panel, Black
$25

Technical Specifications

Motherboard
  • Mini-ITX (L x W: 170 x 170mm)
  • Mini-DTX (L x W: 170 x 203mm)
CPU Air Coolers
AIO Liquid Cooler Support
  • AIO Liquid Cooler Compatibility List
  • Click here for full AIO Compatibility Spreadsheet [Google Docs]
  • Radiator Mounting
  • 2x 120mm radiator on side
  • 1x 240mm radiator on side
  • 1x 280mm radiator on side
  • Dual Radiator Options (custom loop only)
  • 1x 240mm radiator on bottom, with slim fans + choice of side radiator from above
  • Side Bracket Radiator + Fans must be less than 105mm thick (Push/Pull fan configs are possible)
  • Rear Passthrough Holes
  • 20.5mm diameter (0.825")
  • 35mm apart on center (1.39")
Fan Mounting
  • Top
  • No Handle: 1x or 2x 120mm slim fans
  • with Handle: 1x 120mm slim fan when handle is installed
  • NOTE: IF USING LARGE AIR COOLERS LIKE D15 IT IS NOT GUARANTEED THAT SLIM TOP FANS WILL FIT
  • Bottom
  • 2-Slot GPU: 2x 120mm or 2x 140mm standard thickness fans (thickness of fans + thickness of card be <70mm)
  • 3-Slot GPU: 2x 120mm or 140mm slim fans (thickness of fans + thickness of card be <70mm)
  • NOTE: width of GPU + fans must be equal to or under 70mm total when combined (ex: 55mm thick GPU + 15mm thin fans = 70mm)
  • SFX PSU in standard "length-wise" position
  • 1x 120mm fan on PSU cover shroud
  • 2x 120mm or 140mm on side mount bracket
  • SFX PSU in "width-wise" position
  • 1x 120mm or 140mm fan on front of chassis frame
  • and
  • 2x 120mm or 140mm on side mount bracket
  • or
  • 1x 120mm fan on chassis side (where length wise PSU would normally mount)
GPU / PCIe Cards
Storage
  • (2x) 2.5" SSD/HDD mounting points on base chassis
  • Optional bracket for (2x) 2.5" SSD/HDDs
  • Optional bracket for (3x) 3.5" HDDs
  • Bracket can be configured for a combination of 3.5" and 2.5" drives
Front Panel I/O
  • (2x) USB 3.0 Ports
  • (1x) Momentary Switch / Power Status LED (Ring Shape, White)
Power Supply
  • SFX
  • SFX-L power supplies are not recommended, but are possible to use.
Material
  • Chassis
  • ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel
  • Side Panels
  • ASTM B209-10 5052-H32 0.080" Aluminum Sheet
  • Handle
  • Machined B308M-10 Aluminum-Alloy 6061-T6
  • Feet
  • Cavity Molded 75 Durometer Nonmarking Black SBR
  • or
  • Machined B308M-10 Aluminum-Alloy 6061-T6, Chrome Plated
Finish
  • Fine texture powder coated chassis and panels
  • Unpainted chassis, panels, or parts available on request (for DIY paint jobs)
  • Optional custom powder coat finishes, MOQ 25 units
Branding
  • Case is unbranded on interior and exterior of chassis.
  • Optional logo screen printing (full color) on front panel for business customers, MOQ 5 units
Outside Dimensions
  • 13.57" x 7.33" x 10.08" [LxWxH]
  • 344mm x 186mm x 256mm [LxWxH]
Case Volume
  • 16.3 Liters
Weights
  • Base Chassis (Chassis Frame, Side Panels, Front Panel, Top Panel, Power Cord, and both PSU brackets)
  • 7.90 lbs
  • Handle Bracket (mounting bracket, no handle)
  • 0.40 lbs
  • Handle w/ screws
  • 0.50 lbs
  • Handle Bracket with Handle and screws
  • 0.90 lbs
  • Packaging Materials (Box, Tape, Foam Corners)
  • 1.60 lbs
Warranty
  • Case
  • 5 Year Warranty [Chassis, USB cables, Power Button, Power Cable]
  • Liquid Coolers & Fans
  • 3 Year Warranty
  • Please see our warranty policy for additional conditions, exclusions, and limitations.
Homologation
  • HTS Tariff Code
  • 8473.30.00.02
  • Country of Origin
  • United States of America
Rev Control
  • 1.0 (11/22/20 - **/**/**)
  • Initial Release