CX3702 Short-depth 10 bay NAS for MicroATX Motherboards
CX3702Short-depth 10 bay NAS for MicroATX Motherboards
  • Micro-ATX motherboard with four(4) slot cutouts for PCIe cards; GPU, NIC, HBA/RAID
  • Ten(10) trayless 3.5" SATA or SAS HDD mounts via captive SFF-8482 adapters
  • Magnetically attached front panel, locking mechanism for retaining HDDs
  • Four(4) internal 2.5" SSD mounts for cache and boot drives
  • Mounting for up to two(2) 120mm exhaust fans, washable front dust filter
  • Mounting for 120mm AIO
  • Mounts one(1) SFX or SFX-L power supply
  • Made in USA with US materials, guaranteed availability for 8+ years
Add To Cart
FREE SHIPPING (US ONLY)
Order Terms & Conditions
*Assembled to Order

Please note, chassis are assembled to order, and may take 3-10 business days to fulfill.

Higher quantity orders are granted priority in our queues, and options to expedite your order are available if needed.

To verify if expediting your order is an option, please contact us directly at 1-775-356-5595 or sales@sliger.com.


Front Panel Color




BUSINESS CUSTOMERS: Custom branded front panels are available!
Services include custom powder coating of any color on Prismatic Powders, modified vent patterns, and full color screen printing (including gradients). Please contact sales@sliger.com to discuss your requirements. A minimum order quantity (MOQ) of 10 units is required.
120mm Fans
Fans are NOT included with the chassis unless selected here.
Fan mounting screws and 30cm PWM extension cables are included with all fans purchased.
General Devices Rack Slides

Installation instructions for our General Devices Series rack slides are available here.

Replacement / Optional Parts

This page is for replacement parts for existing cases. New case orders per the configure tab include all required panels, brackets, cables, screws, and accessories for assembly per the options selected on that tab.
General Devices 14" Slides
Rack Slides for All Chassis

Custom General Devices C300S friction rack slides for all Sliger rackmount products.

  • Includes Mounting Hardware
  • Front and rear brackets
  • Screws and custom dimples
  • For 16" to 31" Rack Post Spacing
  • 6", 12" and 18" rear extensions included
$99
General Devices 20" Slides
Rack Slides for All Chassis

Custom General Devices C300S friction rack slides for all Sliger rackmount products.

  • Includes Mounting Hardware
  • Front and rear brackets
  • Screws and custom dimples
  • For 21" to 37" Rack Post Spacing
  • 6", 12" and 18" rear extensions included
$109
General Devices 26" Slides
Rack Slides for All Chassis

Custom General Devices C300S friction rack slides for all Sliger rackmount products.

  • Includes Mounting Hardware
  • Front and rear brackets
  • Screws and custom dimples
  • For 27" to 43" Rack Post Spacing
  • 6", 12" and 18" rear extensions included
$119
3U NAS Black Faceplate
Obsidian Black Faceplate for CX3700 Series

Standard 3U NAS magnetic faceplate for CX3700 series chassis.

  • Standard Filter Foam Included
  • Filter foam will attached to front panel
  • Obsidian Black Color
  • Powdercoated in house
$40
3U NAS White Faceplate
Matte White Faceplate for CX3700 Series

Standard 3U NAS magnetic faceplate for CX3700 series chassis.

  • Standard Filter Foam Included
  • Filter foam will attached to front panel
  • Matte White Color
  • Powdercoated in house
$40
3U NAS Red Faceplate
Carmine Red Faceplate for CX3700 Series

Standard 3U NAS magnetic faceplate for CX3700 series chassis.

  • Standard Filter Foam Included
  • Filter foam will attached to front panel
  • Carmine Red Color
  • Powdercoated in house
$40
3U NAS Blue Faceplate
Cobalt Blue Faceplate for CX3700 Series

Standard 3U NAS magnetic faceplate for CX3700 series chassis.

  • Standard Filter Foam Included
  • Filter foam will attached to front panel
  • Cobalt Blue Color
  • Powdercoated in house
$40
30ppi Filter Foam
Open Cell Polyether Filter Foam for All Chassis

30ppi Open Cell Polyether Filter Foam for All Chassis

  • Two 6.62"x14.40" Pieces
  • Washable for Extended Life
$25
Hardware Kit
For CX3702 Chassis

Accessory kit for CX3702 chassis

  • Includes rack ears, pull handles
  • Includes 4 PCIe slot covers
  • Includes screws operation/installation
$20
Technical Specifications
SAS Expansion

Direct Attached Storage (DAS)

JBOD Enclosure

RAID Enclosure
Motherboard
  • Mini-ITX (170mm × 170 mm) [6.7" × 6.7"]
  • Micro-ATX (244mm x 244mm) [9.6" x 9.6"]
  • Deep Mini-ITX (170mm x 209mm) [6.7" x 8.2"]
  • NOTE: Motherboard mounting tray can be slid out of case to simplify assembly and maintenance
CPU Air Coolers
CPU Liquid Coolers
  • One(1) 92mm liquid cooler (Asetek 645LT) with 120mm to 92mm adapter
  • 92mm AIO to 120mm fan adapter is a 3D printed part
  • One(1) 120mm liquid cooler (Asetek 650LKS) - maximum 27mm thickness
Dust Filter
  • Includes one(1) washable / reusable dust filter
  • 30ppi open cell reticulated polyether filter foam with flame resistant rating, UL94 HF1, UL FILE NO E93229(N)
  • Alternate density and/or materials such as aluminum mesh available for OEM projects
Fan Mounting
GPU / PCIe Cards
  • Four(4) full height PCIe card slot cutouts
  • Maximum card height: 115mm - including power connectors
  • ENSURE CLEARANCE FOR 12-pin 12VHPWR / CEM5 POWER CONNECTOR
  • Maximum card length: 245mm
  • Full list of compatible GPU cards [PCPartPicker.com]
  • If using a dual slot PCIe card, such as a GPU, you must use a slim (15mm thick) 120mm fan on the side vent
Storage
  • Ten(10) 3.5" SAS or SATA Hard Drive Disks
  • Case includes ten(10) SATA/SAS SFF-8482 male to SATA female adapters (preinstalled in case)
  • Four(4) shoulder screws attached to 3.5" HDDs
  • These shoulder screws guide HDDs through slots and align the drive to a backplane mounted SATA to SATA adapter
  • User must connect SATA data and power cables on inside of case to these SATA to SATA adapters
  • Case has a locking mechanism and key, as well as thumb screws, to secure drives
  • Case also includes two(2) SATA power distribution cables (one(1) SATA power male to five(5) SATA power female)
  • Case does NOT include any data cables
  • Hot-swap support can depends on your HBA / RAID card, motherboard, and OS.
  • Please note that connecting a SAS drive to a SATA port will operate as SATA.
  • A SAS controller can control SATA drives, but a SATA controller cannot control SAS drives.
  • Four(4) 2.5" SSD/HDD mounting points (behind power button and USB front panel area)
Front Panel I/O
  • One(1) USB 3.2 Type C 10Gbps Port
  • Two(2) USB 3.0 Type A Ports
  • One(1) 16mm Momentary Power Button with integrated Power Status LED (Ring Shape, White)
Power Supply
Rack Rails
  • General Devices C300-S Series
  • Rack Rails are not included by default, must be purchased on the configuration or parts page.
Warranty
  • Case and Rack Rails
  • 5 Year Warranty
  • Liquid Coolers & Fans
  • 3 Year Warranty
  • Please see our warranty policy for additional conditions, exclusions, and limitations.
Rev Control
  • 1.0 (8/1/24 - **/**/**)
  • Initial Release
Case Mechanicals
Material
  • Chassis
  • ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel
  • Front Panels
  • ASTM-A-653 G30 Zero Spangle 18 Gauge Galvanized Steel
  • Rack Ears
  • ASTM-A-653 G30 Zero Spangle 14 Gauge Galvanized Steel
Finish
  • Semi-gloss fine texture powder coat finish
  • Powder coat is an outdoor architectural grade polyester epoxy blend
  • Compliant with SAE AMS-STD-595 / FED-STD-595 color number 27038 (ANA 514)
  • Custom powder coat finishes are available, additional labor/material charges and 10 unit MOQ will apply.
  • Unpainted chassis, panels, or parts available on request (for DIY paint jobs)
Branding
  • Case is unbranded on interior and exterior of chassis.
  • Optional logo screen printing (full color) on front panel for business customers, MOQ 10 units
Outside Dimensions
  • 18.04" x 17.00" x 3U (5.22") [DxWxH]
  • 458mm x 432mm x 132.5mm [DxWxH]
  • Depth from front rack post is 17.89" [454mm]
Weights
  • Chassis
  • 22.75lbs [10.32kg]
  • Rack Slide Kits - All Rail Kits Will Ship In Separate Box
  • GDRAIL-14XX - 6lbs [2.72kg]
  • GDRAIL-20XX - 7.5lbs [3.4kg]
  • GDRAIL-26XX - 8.75lbs [3.97kg]
  • Fans
  • 1.4lbs [.64kg] total - .7lbs per fan
  • Packaging Materials (Box, Tape, Foam Corners)
  • 3.25lbs [1.47kg]
Shipping
  • 20.5" x 21.5" x 9.5" (Shipping Box Outside Dimensions)
  • 20" x 21" x 9" (ID)
  • Shipping box is ECT52, Double Wall, Kraft Brown
  • Standard SLIGER branded tape, optional unbranded kraft brown tape for business customers
Regulatory & Homologation
Product Lifecycle
  • Planned availability through 2032
  • Extended availability beyond 8 years as built-to-order(BTO) with a 25 unit MOQ
EMI / Safety
  • Case cannot be certified as a standalone item. Certifications must be sought as a fully integrated system.
  • Contact us before using case for FCC, CE, UL, IEC, or other safety / regulatory compliance.
  • Alternate vent sizes, brackets, EMI springs, and/or powder coat masking, may be required depending on certifications sought.
  • UL listed wire, fans, coolers, and materials where possible
Industry Standards
  • 19-inch rack standard
  • Electronic Industries Alliance EIA-310-D
  • International Electrotechnical Commission IEC 60297-1 / IEC 60297-3-100
  • Consumer Electronics Association CEA-310-E
  • Deutsches Institut für Normung DIN 41494
Environmental
  • Compliant with RoHS Directive 2002/95/EC, 2015/863 RoHS2, RoHS3 (EU) with all applicable exemptions
  • Regulation (EC) No 1907/2006 Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • Compliant for all Substances of Very High Concern (SVHC)
  • Conflict–Free Sourcing Initiative (CFSI) with Conflict-Minerals Report (CMRT) available upon request
  • Compliant with US EPA PBT Section 6 Toxic Substances Control Act (TSCA)
Import / Export
  • Harmonized Tariff Schedule (HTS) / HS Schedule B
  • 8473.30.0002 - COMPUTER CASES AND ACCESSORIES
  • Export Control Classification Number [ECCN]
  • EAR99 LOW-TECHNOLOGY CONSUMER GOODS
  • Country of Origin
  • United States of America
  • "Made in USA" per Federal Trade Commission (FTC) subchapter C title 16 Code of Federal Regulations Part 323
  • TAA (Trade Agreements Act) Compliant for GSA Schedules, IDIQ contracts, and DoD contracts
  • Compliant with Section 889 of Federal Acquisition Regulation (FAR) of National Defense Authorization Act (NDAA)