CONSOLE Console Style Small Form Factor Mini-ITX PC Case
CONSOLEConsole Style Small Form Factor Mini-ITX PC Case
  • Supports Mini-ITX motherboards
  • Front panel with USB 3.1 Type C (SS+ 10 Gbit/s), USB 3.0 Type A, and Dual Audio Jacks
  • Compatible with air coolers up to 53mm tall
  • Supports dual slot GPUs up to 325mm long x 155mm tall
  • Support SFX and SFX-L form factor power supplies
  • Mounts two 120mm x 15mm thick fans for high performance cooling
  • Designed and manufactured in the USA by Sliger
Front Panel Board Connector
* This option connects both 3.0 A and USB C ports to a single motherboard header, recommended for AMD Ryzen 3.
**This style header is common on many ASUS, Gigabyte, and EVGA Intel Mini-ITX motherboards.
* The CONSOLE is designed specifically for use with these fans, using this case without fans my limit the performance of your system due to potential thermal constraints. It is only recommended to select NO if you have your own fans, or are building a low power (<300W) system. Fans come in retail packaging.
Vertical Base Plate
* All orders includes four rubber feet for laying the CONSOLE flat on a desk.
A Vertical Mount Base Plate is not required to use this case.
Power Supply Cable
* Standard power cable restricts GPU height to 133mm (this prevents some oversized MSI and Zotac cards from being mounted)
** Pigtail power cable mount restricts GPU height to 145mm tall (this allows for taller MSI Gaming and Zotac GPUs)
Add To Cart
Due to high demand orders are currently taking between 5 and 10 business days to fulfill.
Orders typically ship in 1-3 business days. Order ship date estimates are not based on live data, holidays and/or promotions may cause lead times to extend. Please contact or call us 775 356 5595 for updates on estimated ship date.
International shipping calculated in cart. Sliger is not responsible for import duties and/or taxes.

Technical Specifications

  • Mini-ITX (170mm × 170 mm)
  • Not compatible with Mini-DTX boards such as the ASUS ROG Crosshair VIII Impact AM4
CPU Liquid Coolers
  • AIO liquid coolers are not supported in CONSOLE.
CPU Air Coolers
  • Maximum of 53.40mm tall CPU coolers
  • Noctua L9i/L9a (can be used with 92mm x 25mm fan)
  • AMD Wraith Stealth (54mm, pushes on inside of the cover but not significantly)
  • Cooltek LP53
  • Alpenföhn® Black Ridge
  • Intel Boxed Cooler
  • Cryorig C7 CU
  • Cryorig C7
  • Cooltek ITX30
  • Phanteks PH-TC90LS
  • Silverstone AR05
  • Silverstone AR11
  • ThermalTake Engine 27
Fan Mounting
  • Note that fans are positioned via standoffs and long M3 screws. Standard fan screws are not required.
  • Two 120mm x 15mm slim fans behind GPU as exhaust
  • Fans can be a maximum of 15mm thick
  • 2x Noctua NF-A12x15 are recommended
GPU / PCIe Cards
  • Strictly supports two(2) slot wide cards. If you card is wider than its bracket, it will not fit.
  • GPU height varies with power cord mounting option
  • with Standard Inlet
  • Maximum card height: 133mm
  • Maximum card length: 324mm (up to 335mm is possible, but difficult to position)
  • Maximum card width: 2 slot, up to 40mm
  • with Pigtail Inlet (recommended for MSI and ZOTAC cards)
  • Maximum card height: 157mm
  • Maximum card length: 324mm (up to 335mm is possible, but difficult to position)
  • Maximum card width: 2 slot, up to 40mm
  • 157mm of height for GPU + GPU power connectors regardless of Standard or Pigtail
  • CONSOLE does not support PCIe bifurcation risers.
  • None, case is strictly designed for motherboard M.2 SSDs
Power Supply
  • SFX
  • Corsair SF series
  • SilverStone SST-SX series
  • EVGA SuperNOVA GM series
  • FSP Dagger series
  • SFX-L is supported, but not recommended.
Front Panel I/O
  • One USB 3.1 Gen 2 Type C to USB E header (SS+ 10 Gbit/s)
  • One USB 3.0 Type A to 20-Pin Motherboard Header
  • Two Audio Jacks to standard 9-Pin HD AUDIO header
  • Chassis
  • SECC ASTM-A-653 G30 Zero Spangle 20 Gauge Galvanized Steel with Powder Coat Finish
  • Front Panel
  • ASTM B209-10 5052-H32 0.063" Aluminum Sheet, Clear Anodized
  • Feet
  • Cavity Molded 75 Durometer Nonmarking Black SBR
  • Fine texture black powder coated chassis
  • Grained and clear anodized front panel
Case Dimensions (LxWxH)
  • 13.50" x 13.62" x 2.68" - WxDxH
  • 343mm x 346mm x 68mm - LxWxH
  • 2.13 Gallons
  • Base Chassis (includes corver, PSU bracket, fan grill, power cord, riser, and front panel board)
  • -.--lbs
  • Handle
  • -.--lbs each
  • Base Plate
  • -.--lbs each
  • Fans
  • -.--lbs each
  • Packaging Material
  • -.--lbs each
  • Case (including power button, riser, USB/audio board)
  • 5 Years
  • Fans / CPU Air Coolers
  • 5 Years
  • Liquid Coolers
  • 3 Years
  • Power Supplies
  • 3 Years
  • Please see our warranty policy for additional conditions, exclusions, and limitations.
  • HTS Tariff Code
  • 8473.30.80.00
  • Country of Origin
  • United States of America
Rev Control
  • CL520-A (3/16/20 - X/X/XX)
  • Initial Release
User Build Albums
  • Submit your build log to - we'll feature it here or in the gallery!
  • Coming Soon!
Community Links